CP15 Commercial Boiler Service

We provide 24/7 annual commercial boiler servicing, diagnostics and repairs. The service will ensure that all parts are in good working order, for instance, that the awning has the correct appearance, that carbon dioxide and carbon monoxide levels are not too high, and that there are no gas leaks on boilers or pipework.

Commercial Boiler Maintenance and BMS Controls

All property owners are responsible for making sure that all rental properties, either large domestic or non-domestic with a gas boiler or any gas equipment, undergo an service and maintenance audit. This should be arranged by the facilities manager or rental agent and should be done on an annual basis. Why not spare yourself the escalation of calls every year and contact Commercial Gas Safety Checks, where we can arrange for regular annual safety checks to ensure that your rental property remains gas safe every year. For your convenience, we may even contact the renter to schedule our visit on your behalf.

How to get a Commercial Boiler Service?

Call us today, and we will carefully listen to your requirements. Our qualified engineer will service all the appliance of your boiler room is working correctly and check your boiler operating at correct gas pressure as well as making any adjustments required. They also perform complete system tests and ventilation audits to ensure regulatory compliance and the safe use of devices. The entire process on-site usually takes about an hour depending on the site of boiler, but it may take much longer in larger commercial spaces with multiple boilers.

Once assessed, the commercial boiler service certificate will be emailed on the same day or the next business day. If you are a commercial landlord, you are required to have your boiler serviced annually. Landlords must also maintain a record of gas safety inspections for a minimum of four years and issue a final certificate to existing tenants and any new tenants prior to moving in.

CP17 Commercial Gas Certificate

Landlords, managing agents, Duty holders and employers with the non-domestic property are legally obligated to ensure that they maintain a Gas Safety Certificate or CP17 for their leased or rented property.

CP17 Commercial Boiler Gas Safety?

CP17 Gas Certificates are issued following physical and visual safety inspection by a Registered Commercial Gas Safe registered Engineer. Commercial gas safety checks are conducted on all gas heating appliances and visible piping within a commercial property to ensure that they are in good and safe working condition.

Inspections and tests are performed on gas equipment and gas pipelines include furnace, fires, gas meters, burner, boilers, forced draught burners, industrial flues and chimneys to make sure they are safe, secure and sound enough for commercial premises. If the appliance uses an exhaust system to remove flue gases, they will also be inspected to see if the exhaust method is appropriate and if the required ventilation is provided or sufficient.

You will receive a CP17 Commercial gas certificate from our commercial gas engineer on completion, which will record the results of gas equipment installed on your premises.

The CP17 commercial gas safety check can be carried out between the 11th and 12th months from the date of the previous gas certificate (if the property has been permanently rented out). Therefore, it is important to indicate the date of the previous gas test so that we can carry out a new gas test at a sufficient time before the previous one ends.

Penalty of failure Gas Safety Regulations

You will need to inform your tenant and set a suitable and convenient date in case you need to turn off the gas in rare occasion. Failure to comply with the Gas Safety Regulations could result in legal action of up to £ 5,000.

CP12 Gas safety certificate

About 30 people die each year from badly installed or poorly maintained gas appliances and chimneys in the United Kingdom, leading to fatal carbon monoxide poisoning. The Gas Safety Certificates Act here in the UK is part of a set of regulations called the Gas Safety Regulations (Uses and Installation) 1998 (1). These regulations cover all aspects of the installation and uses of gas appliances for commercial and homes purpose, including who can run the gas, how it should be measured and what maintenance should be done.

CP12 Homeowner/Landlord Gas Safety Certificate

The cp12 gas certificate is the official name for the Safety Certificate that is issued every year by a Registered Gas Safety Engineer and applies to all appliances and installations in your kitchen.

The gas safety check will include all gas pipelines, appliances, gas interlock systems and exhaust systems. The inspection will ensure that all parts are covered, for instance, that the awning has the correct appearance, that carbon dioxide and carbon monoxide levels are not too high, and that there are no gas leaks on any kitchen equipment.

The landlord should care about the Gas Safety certificate

All property owners are responsible for making sure that all rental properties, either domestic or non-domestic with a gas boiler or any gas equipment, undergo an annual gas safety audit. This should be arranged by the homeowner or rental agent and should be done on an annual basis. Why not spare yourself the escalation of calls every year and contact commercial gas safety check, where we can arrange for regular annual safety checks to ensure that your rental property remains gas safe every year. For your convenience, we may even contact the renter to schedule our visit on your behalf.

How to get a Landlord Gas safety certificate?

Call us today, and we will carefully listen to your requirements. Our qualified engineer will check that all the appliance of your nondomestic kitchen is working correctly, with the correct working pressure. They also perform complete system tests and ventilation audits to ensure regulatory compliance and the safe use of devices. The entire process on-site usually takes about an hour, but it may take longer in large commercial spaces.

Once assessed, your gas safety certificate will be emailed on the same day or the next business day. If you are a landlord, you are required to renew your gas safety certificate annually. Landlords must also maintain a record of gas safety inspections for a minimum of four years and issue a final certificate to existing tenants and any new tenants prior to moving in.